Synfocom Systems LLP

• Speed
• Range
• Easy Setup
• Security 

• Speed
• Range
• Easy Setup
• Security

• The T1500-28PCT supports 24 ports of IEEE 802.3at/af-compliant PoE and has a total power supply of 180W to power any 802.3at or 802.3af compliant power device. It’s an ecient and cost-eective choice to work with wireless access points, surveillance cameras, IP phones and other PoE supported devices, while getting rid of cables or power lines running around. Compact and exible, the T1500-28PCT is ideal to exibly use PoE to deploy wireless access points or IP-based network surveillance cameras for projects or small business networks.

• To integrate voice, data and video service on one network, the switch applies rich QoS policies. Administrator can designate the priority of the trac based on a variety of means including Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supports, the voice applications will operate with much smoother performance.

• For more application of layer 2 switches, T1500-28PCT supports a complete lineup of layer 2 features, including 802.1Q tag VLAN, Port Isolation, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Group and 802.3x Flow Control function. Any more, the switches provide advanced features for network maintenance such as Loop Back Detection, Cable Diagnostics and IGMP Snooping. IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling&ltering restrict each subscriber on a port level to prevent unauthorized multicast access.

• T1500-28PCT is easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface (GUI) or SNMP (v1/2/3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events.

• With four PoE ports, transfers data and power on one single cable
• Working with IEEE 802.3af compliant PDs, expands home and office network
• Supports PoE power up to 15.4W for each PoE port
• Supports PoE power up to 57W for all PoE ports
• Requires no configuration and installation

• Overload Arrangement: TL-SF1008P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 57W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
• Port Priority Function: Priority (port 1 = port 2 = port 3 > port 4): This function will help protect the system when the system power is overloaded. For example, port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to port 3 with 12W, and then the system will cut off the power of port 4 because of the overloaded power, this means port 1, 2 will use 15.4W, and port3 will use 12W, no power will be supplied to port 4.

• TL-SF1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps Desktop Switch with 4-Port PoE TL-SF1008P is a great selection for expanding your home or office network

• 5 10/100/1000Mbps RJ45 ports
• With four PoE ports, transfers data and power on one single cable
• Working with IEEE 802.3af compliant PDs, expands home and office network
• Supports PoE Power up to 15.4W for each PoE port
• Supports PoE Power up to 56W for all PoE ports
• 802.1p/DSCP QoS enable smooth latency-sensitive traffic
• Plug and play, no configuration and installation required

• Overload Arrangement: TL-SG1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 56W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
• Port Priority Function: Priority (port 1=port 2=port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4W (maximum power per port is 15.4W), the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 10W then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4W, and Port 3 will use 10W, and no power will be supplied to Port 4.

• TL-SG1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link TL-SG1005P 5-Port Gigabit Desktop Switch with 4-Port PoE is a great selection for expanding your home or office network.

• This new generation TL-SG1016D/TL-SG1024D Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.

• All 16/24 ports are Gigabit RJ-45 ports which can provide large file transferring and also be compatible with 10Mbps and 100Mbps Ethernet devices. Featuring non-blocking switching architecture, TL-SG1016D/TL-SG1024D forwards and filters packets at full wire-speed for maximum throughput. With 10KB Jumbo frame, the performance of large file transfers is improved signicantly. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make The TL-SG1016D/TL-SG1024D work reliably. It’s a perfect choice to update your network to Gigabit while protecting your previous investment properly.

• The auto features of this gigabit switch make installation plug and play and hassle-free. No Configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance

• Gigabit Ethernet connections on all ports provide full speed of data transferring
• L2+ feature——Static Routing, helps route internal traffic for more efficient use of network resources
• IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X Authentication and Radius provide you robust security strategies
• L2/L3/L4 QoS and IGMP snooping optimize voice and video application
• IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery
• Web, CLI (Console Port, Telnet, SSH), SNMP, RMON and Dual Image bring abundant management policies.

• TP-LINK JetStream L2 managed switch T2600G-28TS provides IP-MAC-Port Binding, Port Security, Storm control and DHCP Snooping which protect against broadcast storms, ARP attacks, etc. It integrates some typical DoS attacks to select. You can protect these attacks more easily ever than before. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. Moreover, the switch supports 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed. Guest VLAN function supports to enable the non-802.1X clients to access the specific network resource.

• To integrate voice, data and video service on one traffic based on a variety of means including IP or MAC address, TCP or UDP port number, etc, to ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supporting, the voice applications will operate with much smoother performance.

• Static routing
• L2PT*
• Link Aggregation Control Protocol (LACP)
• STP/RSTP/MSTP
• IGMP Snooping
• Loopback Detection

• Support IEEE 802.1P
• 8 priority queues
• DSCP QoS
• Rate limit feature

• IP-MAC-Port Binding
• Access Control List (L2~L4 ACL)
• AAA*
• 802.1x and RADIUS Authentication
• Support DoS defend
• Port Security
• SSL and SSH encryptions

• Dual IPv4/IPv6 Stack
• MLD Snooping
• PMTU Discovery
• IPv6 Neighbor Discovery
• IPv6 ACL*
• DHCPv6 Snooping*
• IPv6 Interface*

• 802.3ah Ethernet Link OAM
• Device Link Detect Protocol(DLDP)

• Web-based GUI
• Command Line Interface
• Telnet
• SNMP v1/v2c/v3
• RMON (1,2,3,9 group)
• Dual Image
• DHCP Server*
• DHCP Relay*
• sFlow*
• LLDP, LLDP-MED

• The TL-SG2210P supports 8 ports of IEEE 802.3af-compliant PoE and has a total power supply of 53W to power any 802.3af compliant power device. It’s an efficient and cost-effective choice to work with wireless access points, surveillance cameras, IP phones and other PoE supported devices, while getting rid of cables or power lines running around. Compact and flexible, the TL-SG2210P is ideal to flexibly use PoE to deploy wireless access points or IP-based network surveillance cameras for projects or small business networks.

• To integrate voice, data and video service on one network, the switch applies rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means including Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and jitter free.In conjunction with the Voice VLAN the switch supports, the voice applications will operate with much smoother performance.

• For more application of layer 2 switches, TL-SG2210P supports a complete lineup of layer 2 features, including 802.1Q tag VLAN, Port Isolation, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control function. Any more, the switches provide advanced features for network maintenance such as Loop Back Detection, Cable Diagnostics and IGMP Snooping. IGMP Snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access.

• TL-SG2210P is easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface(GUI) or industry-standard Command Line Interface(CLI). SNMP (v1/2/3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events.

• TP-LINK JetStream switch TL-SG3210 provides IP-MAC-Port-VID Binding, Port Security, Storm control and DHCP Snooping protecting against broadcast storms, ARP attacks, etc. It integrates some typical DoS attacks to select. You can protect these attacks more easily ever than before. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. Moreover, the switches support 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed. Guest VLAN function supports to enable the non-802.1X clients to access the specific network resource.

• To integrate voice, data and video service on one network, the switch applies rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means including IP or MAC address, TCP or UDP port number, etc, to ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switches supporting, the voice applications will operate with much smoother performance.

• For more application of layer 2 switches, TL-SG3210 supports a complete lineup of layer 2 features, including 802.1Q tag VLAN, Port Isolation, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control function. Any more, the switches provide advanced features for network maintenance. Such as Loop Back Detection, Cable Diagnostics and IGMP Snooping. IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access.

• TL-SG3210 is easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface(GUI)or industry-standard Command Line Interface (CLI), either administration traffic can be protected through SSL or SSH encryptions. SNMP (v1/2/3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events. In addition, integrated NDP/NTDP protocol, this switch supports to be managed by the commander switch through IP clustering function more easily.

• TP-LINK’s Gigabit Easy Smart switch, TL-SG108E offers network monitoring for users to observe traffic behavior. With Port Mirroring, Loop Prevention and Cable Diagnostics features, TL-SG108E can identify and even locate connection problems on your business network. Moreover, administrators can designate the priority of the traffic based on Port Priority, 802.1P and DSCP Priority, to ensure that voice and video are always clear, smooth and lag-free. Additionally, to improve security and network performance, TL-SG108E supports MTU VLAN, port-based VLAN and 802.1Q-based VLAN functions. TL-SG108E is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user.

• You now have the choice to go green when upgrading to a gigabit network! This new generation of TL-SG108E 8-Port Gigabit Easy Smart Switch features the latest energy-efficient technologies that can greatly expand your network’s capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.

• When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG108E can automatically detect the link status of each port and reduce the power consumption of ports that are idle.

• Ideally, shorter cables would use less power with less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG108E analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.

• TL-SG108E is easy to use and manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops with limited space while also being Rack-mountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis.

• The TL-SG2424P supports 24 ports of IEEE 802.3at/af-compliant PoE and has a total power supply of 180W to power any 802.3at or 802.3af compliant power device. It’s an ecient and cost-eective choice to work with wireless access points, surveillance cameras, IP phones and other PoE supported devices, while getting rid of cables or power lines running around. Compact and exible, the TL-SG2424P is ideal to exibly use PoE to deploy wireless access points or IP-based network surveillance cameras for projects or small business networks.

• To integrate voice, data and video service on one network, the switch applies rich QoS policies. Administrator can designate the priority of the trac based on a variety of means including Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and jitter free.

• For more application of layer 2 switches, TL-SG2424P provides comprehensive layer 2 features, including 802.1Q tag VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control function. Any more, the switch provides advanced features for network maintenance. Such as Loop Back Detection, Cable Diagnostics and IGMP Snooping. IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling & ltering restrict each subscriber on a port level to prevent unauthorized multicast access.

• TL-SG2424P is easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface(GUI) or industry-standard Command Line Interface (CLI), SNMP (v1/2/3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events.

• With four PoE ports, transfers data and power on one single cable
• Working with IEEE 802.3af compliant PDs, expands home and office network
• Supports PoE Power up to 15.4W for each PoE port
• Supports PoE Power up to 58W for all PoE ports
• Plug and play, no configuration and installation required

• Overload Arrangement: TL-SF1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 58W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
• Port Priority Function: Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 58W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4.

• TL-SF1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link’s TL-SF1005P 5-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.

• Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support
• Easily wired network expansion
• Compact design for exible arrangement
• Plug and play setup, no conguration required

• The MS108 is fully compatible with computers, printers, IP cameras, smart TVs, game consoles and more. Instantly turn your home, small oce, and even dormitory into a connected environment.

• Maximum Coverage – Four 5dBi antennas provide up to 500m2 of wireless coverage 
• Enhanced Signal – High gain antennas dramatically increase the strength and stability of the wireless signal 
• 300Mbps Wireless Speed - Ideal for HD streaming, online gaming, and large file downloads 
• Easy Installation - Intuitive webpage guides you through the setup process in minutes.

• Four Omni Directional Antennas - Four fixed antennas provide maximum wireless coverage Enhanced Signal – High quality antennas are arranged to boost wireless performance.

• Quick 3-Step Installation – Intuitive webpage supports quick, hassle free installation.

• Guest Network – Creates two separate networks for you and your guests to ensure safety Parental Controls – Parents can establish appropriate access policies to protect children.

• The MW325R provides wider coverage and more stable wireless performance by precisely arranging four 5dBi antennas that feature advanced antenna technology. You can enjoy smooth streaming, gaming, and browsing from any room in your home.

• Four 802.3af compliant PoE ports, with a total PoE power budget of 55W 
• Flexible deployment for PoE suppoted devices such as wireless access points (APs), IP cameras and IP phones 
• Designed to use a single Ethernet cable for both data and power transmission, lowering infrastructure costs.

• 8 10/100/1000Mbps ports provide up to 16Gbps Switching Capacity 
• 16KB Jumbo Frame improves performance of large data transfers 
• IEEE 802.3x flow control provides reliable data transfer

• 802.1p and DSCP QoS ensures smooth traffic 
• IGMP Snooping optimizes multicast applications 
• Fanless design ensures quiet operation

• Just plug & play, no configuration required 
• Auto MDI/MDIX eliminates the need for crossover cables 
• Auto-negotiation intelligently adjusts for compatibility and optimal performance.

• 5 10/100/1000 Mbps Ethernet ports
• Innovative energy-efficient technology
• Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
• Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware
• Auto-MDI/MDIX eliminates the need for crossover cables
• 15KByte Jumbo frame improves performance of large data transfers
• Desktop or wall-mounting design
• Plug and Play design simplies installation

• 8 10/100/1000 Mbps Ethernet ports
• Innovative energy-efficient technology
• Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
• Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware
• Auto-MDI/MDIX eliminates the need for crossover cables
• 15KByte Jumbo frame improves performance of large data transfers
• Desktop or wall-mounting design
• Plug and Play design simplifies installation.

• TP-LINK’s L2 managed switch TL-SG5412F provides non-blocking switching solutions for gigabit connections and switching capacity with a non-blocking aggregated bandwidth of 24Gbps. It provides 12 gigabit ports and 4 combo RJ45 ports. With this high switching capacity, TL-SG5412F can markedly enhance your network throughput.

• IP Clustering allows up to 32 TL-SG5412F switches to be managed by a single IP, regardless of geographical locations. With all units identified by a single IP address, the stack could be configured, monitored.

• Access Control Lists (ACL, L2 to L4) restrict access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. This is done by hardware, so switching performance would not be compromised. Moreover, the TL-SG5412F switch supports 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed. And more, it supports Guest VLAN to enable the non-802.1X clients to access the specific network resource. In addition, IP-MAC-Port-VID Binding, Port Security, Storm control, DHCP Snooping and IP Source Guard support can protect against broadcast storms, ARP and Denial-of-Service (DoS) attacks, etc. Regarding to the DoS defending, TL-SG5412F provides you some typical DoS attacks to select. You can protect these attacks more easily ever than before. TL-SG5412F will provide you robust security to the network.

• TL-SG5412F supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface (GUI) or industry-standard Command Line Interface (CLI), either administration traffic can be protected through SSL or SSH encryptions. SNMP (v1/2/3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events. This sharing of vital management information saves time and money. With link aggregation, spanning tree protocol (STP/RSTP/MSTP) and virtual stack, a highly intelligent and scalable topology could be established, fulfilling the enterprise customers´ requirement of building a unified, resilient network. 

• To integrate voice, data and video service on one network, TL-SG5412F applies rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means including IP or MAC address, TCP or UDP port number, etc, so voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supporting, the voice applications will operate with much smoother performance. For other multimedia-on-demand application such as IPTV, TL-SG5412F provides advanced features for easy stream management. For example, IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access.

• All 8 Auto-Negotiation RJ45 ports of the switch support Power over Ethernet Plus(PoE+) function. These PoE+ ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).

• TL-SG1008PE has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 124W, a priority will be arranged among the PoE+ ports, then the system will cut off the power of the lowest-priority port.

• Priority (port 1>port 2>port 3>port 4>port 5>port 6>port 7>port 8): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, 4 and 7 are using 30w (maximum power per port is 30W), the system power is 120w in total (PoE+ max LED is red ). If there is an additional PD inserted to Port 3 with 25w then the system will cut off Port 7 to protect the system, this means Port 1, 2 and 4 will use 30w, and Port3 will use 25w, and no power will be supplied to Port 7. 

• TL-SG1008PE is easy to install and use. It requires no configuration and installation. With desktop/Rackmount design, outstanding performance and quality, the TP-LINK TL-SG1008PE 8-Port Gigabit Desktop/Rackmount Switch with 8-Port PoE is a great selection for expanding your home or office network.

• TP-Link’s brand new JetStream T1600G-28TS gigabit smart switch provides huge upgrade comparing with previous versions. New Web UI design features better operating experience. Small and medium-sized businesses can get cost-effective networking solutions without sacrificing enhanced usability and strong performance because of the integrated L2 and L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and Static Routing.

• T1600G-28TS supports a complete lineup of L2 features, including IGMP Snooping/ MLD Snooping, 802.1Q/MAC/ Protocol VLAN, STP/RSTP/MSTP, Link Aggregation Group(LAG), Port Isolation, Port Mirroring, and 802.3x Flow control function. IGMP Snooping ensures the multicast stream be forwarded intelligently to the appropriate subscribers by the switch, while IGMP Throttling & Filtering restricts each subscriber on a certain level to prevent unauthorized multicast access. Besides, T1600G-28TS also supports L2+ features like static routing. It is a simple way to provide segmentation of the network with internal routing through the switch and helps network traffic to be more efficient.

• To integrate voice, data and video service on one network, the switch applies abundant QoS policies. The administrator can designate the priority of the traffic based on a variety of functions including Port Priority, 802.1P Priority and DSCP Priority, which can ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN that the switch supports, Voice Applications will perform better and smoother.

• T1600G-28TS supports comprehensive IPv6 features including IPv6 management, ACL, QoS and MLD Snooping, all of these features help to ensure a smooth migration to IPv6-based network without changing switches in the future.

• T1600G-28TS supports multiple user-friendly standard management features such as intuitive web-based Graphical User Interface (GUI), industrially standard Command Line Interface (CLI) and SNMP (v1/2/3). It supports RMON (Remote Network Monitoring), which enables the administrator to obtain valuable status information and also enables the switch to send traps when encountering abnormal events. Also, the switch supports Dual Image function, which makes there be less ‘down-time’ when switches are being upgraded/downgraded.

• Gigabit Ethernet connections on all ports provide full speed of data transferring
• L2+ Feature——Static Routing, helps route internal traffic for more efficient use of network resources
• Integrated security strategy including 802.1Q VLAN, Port Security and Storm control help protect LAN area investment
• L2/L3/L4 QoS and IGMP snooping optimize voice and video applications
• IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery
• WEB/CLI managed modes, SNMP, RMON and Dual Image bring abundant management features.

• This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.

• The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024D forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024D work reliably.

• The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.

• This new generation TL-SF1048 10/100Mbps Switch features the latest innovative energy-effcient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.

• Featuring non-blocking switching architecture，TL-SF1048 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1048 work reliably.

• The auto features of this Fast Ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100Mbps) and intelligently adjusts for compatibility and optimal performance.

The TL-SF1016D Fast Ethernet Switch is designed for SOHO (Small Office/Home Office) or workgroup users. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016D can save up to 80%* of the power consumption and 70% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 

High Performance:

• TL-SF1016D Fast Ethernet Switch provides 16 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. Featuring non-blocking switching architecture, TL-SF1016D forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1016D work reliably.

• This new generation TL-SF1016D Fast Ethernet Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
• It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 70% of the packaging material can be recycled.

Easy to Use:

• The auto features of this switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.

• 16 10/100Mbps Auto-Negotiation RJ45 ports, Supports Auto MDI / MDIX
• Green Ethernet technology saves the power up to 80%
• IEEE 802.3x flow control provides reliable data transfer
• Plastic case, desktop or wall-mounting design
• Plug and play, no configuration required

8-Port Fully managed 802.3af PoE Gigabit switch, delivering robust performance and intelligent switching for enterprise networks. The US-8-60W offers the flexibility of (8) Gigabit Ethernet ports with (4) auto-sensing PoE ports to power your UniFi access points and other PoE devices. The US-8-60W supports up to 8 Gbps total, non-blocking line rate, and up to 15W output per PoE port.

Features:

• Manage Your Networks from a Single Control Plane
• Intuitive and Robust Configuration, Control and Monitoring
• Remote Firmware Upgrade
• Users and Guests
• Guest Portal/Hotspot Support

The UniFi® Switch delivers quiet yet powerful performance with its 10 independent switching ports. Sharing a total of 150W PoE, eight Gigabit Ethernet ports offer 802.3af/at PoE+ or 24V passive PoE, and two SFP ports offer optical connectivity.

Features:

• Manage Your Networks from a Single Control Plane
• Intuitive and Robust Configuration, Control and Monitoring
• Remote Firmware Upgrade
• Users and Guests
• Guest Portal/Hotspot Support

UniFi Managed PoE+ Gigabit 8 Port Switch with SFP from Ubiquiti Networks it is easy to expand the capacity and reach of an existing network. This switch features 8 Gigabit Ethernet ports along with 2 SFP ports making it easy to incorporate high-speed local storage networks into the configuration the network ports support 802.3af/at PoE networking standards designed to power devices such as VoIP phones, access points, IP cameras, and more. Once installed, this switch supports Ubiquiti's own UniFi Controller.

• Auto-sensing IEEE 802.3af/at PoE
• 8 x Gigabit RJ45 ports, 2 x SFP ports
• Non-blocking throughput of up to 10 Gb/s
• Switching capacity: 20 Gb/s
• Forwarding rate of up to 14.88 Mp/s
• Maximum power consumption of 150 W
• Supports POE+ IEEE 802.3at/af and 24V Passive PoE
• Desktop mountable

Additional Information:

• Item Code: UF-OLT

The terminal box is used in the end termination of residential buildings and villas or business applications; It can fix and splice with pigtails, max hold 2 pcs SC adapters, it may adopt a variety of optical connection styles and the optical fiber can be managed effectively and quickly installed within an office, house or communication room environment.

• Economic design
• Built-in box surface, convenient installation
• With dustproof device to prevent dust from entering
• Ability to allow cables to enter from both sides of the unit
• Removable cover for easy access
• compact low profile

The 16-Port 10/100 Mb/s Rackmount Switch from TP-Link. Capable of up to 3.2 Gb/s total switching capacity and boasting a forwarding rate up to 2.38 Mpps, this switch is equipped with 16 Fast Ethernet ports, and it comes housed in a 19" rack-mountable steel case. Energy efficient technology helps the plug-and-play switch limit its power consumption by up to 75% Up to 80% Auto-negotiation on each port senses the link speed of a network device and intelligently adjusts for compatibility and optimal performance.

• 16 10/100Mbps RJ45 ports
• Innovative energy-efficient technology saves power up to 75%
• Supports MAC address self-learning and auto MDI/MDIX
• Standard 19-inch rack-mountable steel case

US-8-60W UniFi 8-Port Gigabit PoE Compliant Managed Switch from Ubiquiti Networks features 8 Gigabit Ethernet ports in a small form factor offering improved performance and intelligent switching capabilities for expanding networks. In addition to the 8 Gigabit Ethernet ports, this switch offers 8 Gbps non-blocking throughput, a 16 Gbps switching capacity, and a 11.9 mpps forwarding rate. It also delivers up to 15.4W of power per PoE port.

• 8 x Gigabit RJ-45 ports
• 4 x Auto-Sensing IEEE 802.3af PoE ports
• Non-Blocking Throughput: 8 Gbps
• Switching Capacity: 16 Gbps
• Forwarding Rate: 11.9 Mpps
• Maximum Power Consumption: 12W

The UniFi Managed PoE+ Gigabit 24 Port Switch with SFP from Ubiquiti Networks is capable of providing a stable, reliable network connection to a large number of Ethernet-enabled devices. Add in 802.3af/at PoE compatibility and 500W of available power, and this managed PoE+ switch is capable of powering a variety of PoE compatible network components such as access points, VoIP phones, and much more. Along with Gigabit Ethernet connectivity users can connect high speed storage devices to either of the two SFP ports. Once configured, Ubiquiti's own UniFi controller software makes network configuration and management simple as you can mange PoE settings, operation modes, VLAN configuration, storm control settings per port, and much more.

• Process All Ports at Line Rate / No Loss
• Up to 26 Gbps Non-Blocking Throughput
• 52 Gbps Switching Capacity
• 500W Maximum Power Consumption

Build and expand your network with Ubiquiti Networks® UniFi® Switch, part of the UniFi line of products. The UniFi Switch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks.

Features:

• Manage Your Networks from a Single Control Plane
• Intuitive and Robust Configuration, Control and Monitoring
• Remote Firmware Upgrade
• Users and Guests
• Guest Portal/Hotspot Support

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

Features:

• IEEE 802.3af compliant
• Auto-determine the necessary power requirements
• Gigabit speed support
• Plug-and-Play, requires no configuration

• Gigabit Ethernet connections on all ports provide full speed of data transferring
• Selective RJ45 console port and Micro-USB console port
• Advanced security features include IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control,
• DHCP Snooping, 802.1X and Radius Authentication
• L2/L3/L4 QoS and IGMP snooping optimize voice and video applications
• Web/CLI managed modes, SNMP, RMON and Dual Image bring abundant management features.

• T2500G series switches support a complete lineup of L2 features, including 802.1Q tag VLAN, QinQ, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control function. In addition, the switches provide advanced features for network maintenance, including LoopBack Detection and Cable Diagnostics. IGMP Snooping ensures intelligent forwarding of the multicast stream to only the appropriate subscribers, while IGMP throttling & filtering restricts each subscriber on a port level to prevent unauthorized multicast access.

• The T2500G series switches provide IP-MAC-Port Binding, Port Security, Storm control and DHCP Snooping which protect against broadcast storms, ARP attacks, etc. It integrates some typical DoS attacks to select. You can protect these attacks more easily ever than before. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. Moreover, the switch supports 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed. Guest VLAN function supports to enable the non-802.1X clients to access the specic network resource.

• To integrate voice, data and video service on one network, T2500G series switches apply rich QoS policies. Administrator can designate the priority of the trac based on a variety of means including Port Priority, 802.1p Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supports, the voice applications will operate with much smoother performance.

• T2500G series switches are easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface (GUI) or industry-standard Command Line Interface (CLI), either administration trac can be protected through SSL or SSH encryptions. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events. And it also supports Dual Image, which provides reduced down-time for the switches, when the image is being upgraded / downgraded.

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

Features:

• IEEE 802.3af compliant
• Selectable power output
• Gigabit speed support
• Plug-and-Play, requires no configuration.