Ceiling Access Point

Product Details:

Highlights:

• Provides affordable high-bandwidth 802.11n wireless connectivity for demanding applications 
• Easy to set up and manage by using the configuration wizard 
• Single Point Setup simplifies the deployment of multiple wireless access points 
• Safeguards business information with enhanced security, including advanced encryption, highly secure authentication, and rogue access point detection 
• Attractive design with internal antennas offers flexible installation options 
• Can connect to a Power over Ethernet (PoE) switch or injector, simplifying installation and eliminating the need for expensive additional wiring.

Product Overview:

• In an increasingly mobile workplace, providing secure, high-speed wireless connectivity to employees and guests is more important than ever. The Cisco WAP121 Wireless-N Access Point with Single Point Setup is an easy, affordable way to improve the performance and reach of your small business network with advanced 802.11n wireless technology. This flexible solution is ideal for connecting up to 10 employees on a single access point. With Single Point Setup controllerless multi-access point deployment technology, the wireless LAN can scale up to four WAP121s to provide broader coverage and support additional users as business needs change. Designed for today’s performance-intensive applications, the Cisco WAP121 employs 802.11n wireless technology to deliver high throughput and extended range throughout your office. It features built-in quality-of-service (QoS) features that let you prioritize bandwidth-sensitive traffic, enabling the deployment of business-quality voice over IP (VoIP) and video applications. The Cisco WAP121 is simple to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. A sleek, compact design with flexible mounting options enables the access point to smoothly blend into any small business environment. Support for PoE makes the device easy to install without the need for separate power plugs or expensive new wiring. To enhance reliability and safeguard sensitive business information, the Cisco WAP121 supports both Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. In addition, 802.1X RADIUS authentication helps keep unauthorized users out. For organizations that need to provide secure wireless access to employees, customers, and partners, it also provides support for separate virtual networks, with granular configuration options that let you provide the appropriate level of access for different users. Single Point Setup provides a unique centralized method to administer and control wireless services across multiple access points. Via one access point on the LAN you have a single view of the whole WLAN to replicate configuration, security, and management across all access points. With the Cisco WAP121, you can extend highly secure business-class wireless networking anywhere in the office, with the reliability and flexibility to meet changing business needs.

Features:

• Highly secure, high-speed 802.11n wireless networking delivers enhanced throughput and extended range for bandwidth-intensive applications. 
• Wizard-based setup and configuration enables fast, simple deployment. 
• Single Point Setup controllerless multi-access point deployment and management technology makes configuration simple. 
• Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information. 
• Support for PoE enables easy installation without expensive additional wiring.

Product Details:

Review:

• Free Auranet Controller Software enables administrators to easily manage hundreds of EAPs
• The user-friendly Cluster Mode allows manage up to 24 (EAP115) without requiring any extra hardware or software
• Supports Power over Ethernet (802.3af) for convenient and affordable installation
• Simple mounting design for easy attachment to a wall or ceiling
• Captive portal provides one convenient method of authentication for Wi-Fi guests
• Enterprise class Wi-Fi security help to decrease network security threats
• Multi-SSID divides multiple wireless networks for different user typesc.

Features:

• EAP Controller Software enables administrators to easily manage hundreds of EAPs
• Cluster management makes it easy to manage a small network by allowing up to 24 Auranet EAP115 units to act as a single cluster
• Supports IEEE 802.3af PoE for convenient and affordable installation
• Simple mounting design for easy attachment to a wall or ceiling
• 300Mbps wireless data rate for uninterrupted wireless connection
• Captive portal provides one convenient method of authentication for Wi-Fi guests
• Rate limit per SSID to restrict the bandwidth of each client
• Access Control restricts sets limitations for client access to the specified network segment
• Reboot Schedule enables all APs to automatically reboot within a specified time
• WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN network
• Multi-SSID divides multiple wireless network for different user types
• Load balance ensures large business networks with smooth a network experience
• Compatible with 802.11 b/g/n products
• QoS function prioritizes data, voice, and video to ensure time-sensitive applications take priority over all other traffic
• Durable housing prevents dust from dropping onto the PCB through bypass louver to provide long-term, unhindered operation
• Adopts Low Smoke Zero Halogen (LSOH) materials for UL2043 compliance.

Specifications:

Product Details:

The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you. It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2 GHz. 

Product Details:

Our company has achieved laurels in offering EAP320 TP Link Ceiling Mount Access Point.

Price Range : Rs. 2100 Per Piece Onward.

Product Details:

UniFi Controller with Hybrid Cloud:

• Big things do come in small packages. We took one of our biggest ideas and engineered it to fit into a tiny form factor. Introducing the UniFi Cloud Key, a miniaturized marvel of technology. 
• The UniFi Cloud Key is an integrated computer and software controller minus the bulk. It features a quad-core processor with 2 GB RAM, operating the latest version of the UniFi Controller with built-in hybrid cloud technology.

Breakthrough Efficiency:

• The UniFi Cloud Key is fully capable of configuring and managing dozens of UniFi devices in your deployment. Replacing a dedicated server or computer, the UniFi Cloud Key is an ultra-low energy solution with virtually no footprint.

Hybrid Cloud Technology:

• The Ubiquiti® hybrid cloud configuration provides a secure, private SSO (Single Sign-On) to access all of your UniFi deployments from anywhere in the world. With the Ubiquiti hybrid cloud, a third-party hosted cloud service is not required, so all of your personal data and network information remains local and secure–the way it should be.

Incredible, Agile Scalability:

• Add, provision, configure, monitor, and manage all of your UniFi devices, whether in one or thousands of private networks–all from a central control plane.
• Easily accessible through any standard web browser, the UniFi Cloud Key is a powerful solution for managing your UniFi networks across the campus or across the globe.

UniFi Controller:

• Designed for convenient management, the UniFi Controller software allows admins to configure and monitor UniFi devices using a graphical user interface. There is no separate software, licensing, hosting, or support fee.

Multi-Site Management:

• A UniFi Cloud Key installed at each deployment site provides an always-on, private UniFi cloud service. Every site is accessible through its assigned secure SSO. Each UniFi Cloud Key is independent with its own network monitoring, configuration, maps, statistics, and admin accounts.

Improved User Experience:

• Redesigned to be more intuitive and easier to navigate, the new UI raises the bar for enterprise network management efficiency. Important network details are logically organized for a simplified, yet powerful, interface.

Network Overview:

• A comprehensive overview of your network health is readily available in the new dashboard. Monitor your network’s vitals and make on¿¿¿the¿¿¿fly adjustments as needed.

Detailed Analytics:

• Use the configurable reporting and analytics to monitor large user groups and expedite troubleshooting. 

LAN/WLAN Groups:

• The UniFi Controller can manage flexible configurations of large deployments. Create multiple LAN and WLAN groups and assign them to the respective UniFi devices. 

Wi-Fi Management:
Use the UniFi Controller to provision UniFi APs, configure wireless networks, map out networks, and quickly manage system traffic. Powerful Wi-Fi management features include:

• RF monitoring and device mapping 
• Detailed RF performance analysis 
• Band steering support 
• Guest portal/hotspot support

Router and Switch Management:
Use the UniFi Controller to provision UniFi Security Gateways and Switches. Configure a variety of features:

• WAN/LAN/VLAN configuration 
• Operation mode (switching, mirroring, or aggregate) per port 
• PoE setting per port (device dependent) 
• Jumbo frame and flow control services 
• Monitor and analyze performance of each port

Product Details:

Features:

• 12dBi dual-polarized directional antenna boosts wireless range
• Dedicated power amplifier and low noise amplifier improve radio performance
• Complies with IEEE 802.11b/g/n, wireless speed up to 150Mbps
• Outdoor weatherproof and 4000V lightning/15KV ESD protection design.

Specifications:

Product Details:

Features:

• Built for outdoor Wi-Fi applications
• Up to 300Mbps Wi-Fi with 2x2 MIMO technology
• High transmission power and high gain antennas provide a long-range coverage area
• Durable, weatherproof enclosure to withstand fair and foul weather
• Passive PoE(Power over Ethernet) support and simple mounting design allow for flexible deployment and convenient installation
• Free Omada Controller software enables administrators easily manage hundreds of EAPs
• Captive portal provides a convenient method for guest authentication
• Facebook Wi-Fi and SMS anthentication help to boost your business
• Supports management vlan for an enhanced network management.

Other Details:

• 300Mbps Wireless N

Specifications:

Product Details:

Features:

• Simultaneous 450Mbps on 2.4GHz and 867Mbps on 5GHz totals 1317Mbps Wi-Fi speeds
• Free EAP Controller Software lets administrators easily manage hundreds of EAPs
• Compatibility with 802.3af and Passive PoE support makes deployment effortless and flexible
• Captive portal provides a convenient method for guest authentication
• Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections
• MU-MIMO means access points simultaneously transfer data with multiple devices, speeding up connections
• Beamforming concentrates signal towards where you need it most, providing a fast and stable Wi-Fi experience
• Supports management VLAN for an enhanced network management
• Schedules can be set so access points automatically reboot and Wi-Fi turns on/off at the times you choose.

Other Details:

• AC1350 Wireless MU-MIMO Gigabit.

Specifications:

Product Details:

Features:

• Simultaneous 450Mbps on 2.4GHz and 1300Mbps on 5GHz totals 1750Mbps Wi-Fi speeds
• Free EAP Controller Software lets administrators easily manage hundreds of EAPs
• Support Power over Ethernet(802.3at) for convenient and affordable installation
• Captive portal provides a convenient method for guest authentication
• Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections
• Load balance ensures large numbers of users have smooth network experiences in high density business networks
• Supports management VLAN for an enhanced network management.

Other Details:

• AC1750 Wireless Dual Band Gigabit.

Specifications:

Product Details:

Features:

• Speeds of up to 1.9Gbps over concurrent dual band 802.11ac Wi-Fi with MIMO and TurboQAM technologies
• Airtime Fairness, Beamforming, and Band Steering Technologies guarantee optimal RF performance for business-level applications
• Link aggregation joins two gigabit Ethernet ports to break the bottleneck in network backhaul capacity
• Free EAP Controller Software lets administrators easily manage hundreds of EAPs
• Captive portal provides a convenient method for guest authentication
• Power over Ethernet (802.3at) support and simple mounting design allow for flexible deployment and convenient installation.

Specifications:

Other Details:

• AC1900 Wireless Dual Band Gigabit Ceiling Mount Access Point.

Product Details:

300Mbps Wireless N Wall-Plate Access Point EAP115-Wall:

• Easy-mount construction allows installation into any standard EU-type data wall-box
• Compact, low-profile design fits discreetly with any existing interior style
• Free Auranet Controller Software enables administrators to easily manage hundreds of EAPs
• Support Power over Ethernet (802.3af) for convenient and affordable installation
• Enterprise class Wi-Fi security helps to decrease network security threats
• Captive portal provides one convenient method of authentication for Wi-Fi guests
• Supports management vlan for an enhanced network management.

Specifications:

Product Details:

Thank you for purchasing the Ubiquiti Networks® Tough Switch™ PoE. This Quick Start Guide is designed to guide you through installation and includes warranty terms.

Front Panel Ports:

Front Panel LEDs:

Hardware Installation:

• Place the Tough Switch on a bench top or other flat surface.

Warning:

• Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.

Installation Requirements:

• Drill, 6 mm drill bit, and Phillips screwdriver (wall-mounting) 
• For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.

Important: 

• Although the cabling can be located outdoors, the TOUGHSwitch itself should be housed inside a protective enclosure.

Warning: 

• To reduce the risk of fire or electric shock, do not expose this TOUGHSwitch to rain or moisture. 

Product Details:

Thank you for purchasing the Ubiquiti Networks® TOUGHSwitch™ PoE Pro. This Quick Start Guide is designed to guide you through installation and includes warranty terms.

Front Panel Ports:

Interface	Description
MGMT	10/100 Mbps port used to access the TOUGHSwitch Configuration Interface.
USB	Reserved for future use
Ports 1-8	10/100/1000 Mbps ports for switching and PoE (also available for management by default).
Reset	To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the unit is already powered on.

Hardware Installation:

• Place the TOUGHSwitch on a bench top or other flat surface.

Warning:

• Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.

Installation Requirement:

• For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.
• We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks.
• Important: Although the cabling can be located outdoors, the TOUGHSwitch itself should be housed inside a protective enclosure.
• Warning: To reduce the risk of fire or electric shock, do not expose this TOUGHSwitch to rain or moisture.

Connecting Power:

• Connect the power cord to the power port of the tough switch.
• Connect the other end of the Power Cord to a power outlet.

Connecting Ethernet:

• Connect an ethernet cable from the ethernet port of your computer to the management port of the tough switch.
• Connect ethernet cables from the ethernet ports of your devices to the numbered ports of the tough switch.

Accessing the Configuration Interface:
Connect to the Configuration Interface by performing the following steps:

• Ensure that your computer (or other host machine) is connected to the Management port on the Tough switch.

Note: By default, you can configure the TOUGHSwitch via any port; however, we recommend the Management port. (Access to the Configuration Interface can be limited to the Management port only. You can configure this setting on the Device tab.)

• Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet (e.g., 192.168.1.100).

Product Details:

Product Details:

We are offering UAP AC Lite to our client.

Product Details:

We are offering UAP AC LR to our client.

Product Details:

We are offering UAP AC EDU to our client.

Product Details:

Wireless N Access point

Product Details:

Additional Information:

• Item Code: UAP-AC