Synfocom Systems LLP

Cloud Router Switch is our new Smart Switch series. It is a fully functional Layer 3 switch, and is powered by the familiar RouterOS. All the specific switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch Configuration, and used for routing purposes.

Perfect SOHO gateway router and switch:

• Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet
• Router Os gateway firewall/VPN router
• Up to twenty-five gigabit switch ports ( 1xSFP and 24xRJ45)

Two models are available:

• CRS125-24G-1S-IN - desktop enclosure
• CRS125-24G-1S-RM - 1U rackmount enclosure
• Fully manageable L3 switch, full wire speed switching
• Configure ports as switch, or for routing
• If required, full RouterOS power right there

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. 

Cloud Router Switch 112-8G-4S-IN is a “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and four SFP cages. Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. 

SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features. The device is powered by a Marvell DX switch chip. The device is running an operating system designed specifically for MikroTik switch products - SwOS. SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.

Features:

• Non-blocking Layer 2 switching capacity 
• 16K host table 
• IEEE 802.1Q VLAN 
• Supports up to 4K simultaneous VLANs 
• Port isolation 
• Port security 
• Broadcast storm control 
• Port mirroring of ingress/egress traffic 
• Rapid Spanning Tree Protocol 
• Access Control List 
• MikroTik neighbor discovery 
• SNMP v1 
• Web-based GUI

CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps. CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V. Our CRS series combines a fully functional router and a managable switch with L3 features, it’s powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. IGMP snooping is also supported.

Switching Features:

• Non-blocking Layer 2 switching capacity 
• 16K host table 
• IEEE 802.1Q VLAN 
• Supports up to 4K simultaneous VLANs 
• Port isolation 
• Port security 
• Broadcast storm control 
• Port mirroring of ingress/egress traffic 
• Rapid Spanning Tree Protocol 
• Access Control List 
• MikroTik neighbor discovery 
• SNMP 
• 9204-byte jumbo frames support 
• IGMP snooping 
• static link aggregation

Quick Specifications:

• 8 Gigabit RJ45 Ports 
• 4 SFP Ports 
• Supports PoE+ IEEE 802.3at/af and 24 V Passive PoE 
• Quiet, Fanless Operation 
• Desktop-Rackmount

The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer 3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network. The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hot environments two redundant fans will automatically keep the system cool if needed.

Features:

• Boot option for SwOS or RouterOS 
• Non-blocking Layer 2 switching capacity 
• 16K host table 
• IEEE 802.1Q VLAN 
• Supports up to 4K simultaneous VLANs 
• Port isolation and Port security 
• MSTP 
• HW MPLS forwarding coming in future software update 
• SFP 1.25 and SFP+ 10Gbit module support 
• 800 MHz dual core CPU 
• Dual power supplies 
• Broadcast storm control 
• Port mirroring of ingress/egress traffic 
• Rapid Spanning Tree Protocol (RSTP) 
• Link Aggregation (LACP) 
• Access Control List 
• MikroTik neighbour discovery 
• SNMP v2/v3 
• Rackmount and tabletop 
• Supports -20 to +60 C ambient temperatures 
• Passive cooling with automatic fan for high temperatures

“Dual boot” feature allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules.

We are announcing a special version of the CSS326-24G-2S+RM switch, with added RouterOS as a second boot option, the new CRS326-24G-2S+RM. This is a SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! The “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth lim.

SwOS Features:

• Non-blocking Layer 2 switching capacity 
• 16K host table 
• IEEE 802.1Q VLAN 
• Supports up to 4K simultaneous VLANs 
• Port isolation 
• Port security 
• Broadcast storm control 
• Port mirroring of ingress/egress traffic 
• Rapid Spanning Tree Protocol 
• Access Control List 
• MikroTik neighbor discovery 
• SNMP v1 
• Web-based GUI